Dewalt Thickness Planer DW735 Problems

/ Dewalt / By

Key Takeaways

  • Regular Maintenance is Key: Keep your DW735 planer in top condition by regularly cleaning and lubricating the cutter head and feed rollers to prevent common issues.

  • Proper Adjustment is Crucial: Ensure correct adjustment of the planer settings to avoid difficulties during operation, leading to smoother and more precise planing results.

  • Learn from User Experiences: Benefit from the shared experiences of other users facing DW735 planer problems to troubleshoot effectively and efficiently.

  • Community Support is Valuable: Tap into community insights for troubleshooting tips and solutions, as collective knowledge can provide innovative ways to address planer issues.

  • Implement Valuable Tips: Apply practical tips and techniques shared by experts and experienced users to tackle specific DW735 planer problems effectively.

  • Share and Collaborate: Engage with the community by sharing your experiences and solutions for DW735 planer issues, fostering a collaborative environment for learning and problem-solving.

Identifying Common DW735 Planer Problems

Motor Issues

If your DeWalt DW735 thickness planer’s motor is not starting or running erratically, it could be due to various reasons. Firstly, check the power source and ensure it is connected correctly. Inspect the power cord for any damages that may affect the machine’s performance.

  • Check power connection
  • Inspect power cord for damage

Excessive Snipe

Experiencing excessive snipe at the ends of boards can be frustrating when using the DW735 planer. This issue often occurs due to improper adjustment of the infeed and outfeed tables. Make sure these tables are leveled correctly to reduce snipe on your workpieces.

  • Adjust infeed and outfeed tables
  • Ensure proper leveling of tables

Thickness Measurement Accuracy

Inaccurate thickness measurements can lead to inconsistencies in your woodworking projects when using a DeWalt DW735 planer. To address this problem, calibrate the depth adjustment scale regularly to ensure precise cuts according to your requirements.

  • Regularly calibrate depth adjustment scale

Cutter Head Issues and Fixes

Dull Blades Causing Tear-Out or Rough Cuts

If you notice rough cuts or tear-out on your wood pieces, the issue might lie with the blades. Dull blades can lead to these problems. To fix this, consider sharpening or replacing the blades regularly for optimal performance.

One way to prevent tear-out is by ensuring your planer’s blades are sharp at all times. Regularly inspect them for any signs of wear and tear. You can also invest in high-quality replacement blades that offer longevity and precision.

READ MORE  Dewalt 60v Blower Problems

Misaligned or Improperly Installed Cutter Head Knives

Improperly installed or misaligned cutter head knives can result in uneven cuts and a poor planing finish. To address this issue, carefully follow the manufacturer’s instructions when installing new knives. Use a dial indicator to check for alignment and make adjustments as needed.

Ensure that each knife is properly seated in its designated slot on the cutter head assembly before tightening the screws securely. Proper alignment of the knives will help achieve consistent thickness across your workpieces.

Difficulty in Changing or Adjusting Blades

Struggling with changing or adjusting planer blades is a common challenge faced by many users. If you find it challenging to change blades, refer to your user manual for step-by-step guidance on blade replacement procedures.

When changing blades, take your time to understand how each component fits together within the cutter head mechanism. Following a systematic approach will help you avoid errors during blade changes.

Feed Roller Challenges and Solutions

Gripping Issues

If your dewalt thickness planer dw735 is not gripping the wood correctly, it can lead to a range of problems. The feed rollers play a crucial role in ensuring the smooth and consistent movement of the wood through the planer. If they fail to grip the wood properly, it can result in an uneven feeding process.

When the feed rollers do not have a firm grip on the wood, it can cause issues such as uneven thickness in your boards. This problem arises when one side of the board receives more pressure than the other during passes through the planer, leading to an inconsistent outcome.

  • Pros:

    • Ensures even thickness
    • Smooth feeding process

  • Cons:

    • Uneven boards
    • Inconsistent results

Worn-Out Rollers

Over time, wear and tear can affect feed roller performance. If you notice that your rollers are worn out or damaged, it’s essential to address this issue promptly to maintain optimal functioning of your planer. Replacing worn-out or damaged feed rollers can significantly improve the success rate of each pass through the machine.

When feed rollers are worn out, they may struggle to provide sufficient traction on the wood, resulting in slipping or inadequate feeding during operation.

Adjusting the DW735 Planer Difficulty

Infeed and Outfeed Tables

When setting up your DEWALT DW735 planer, ensure the infeed and outfeed tables are parallel to the cutterhead. Misaligned tables can cause uneven cuts or snipe at the beginning or end of a board. Adjust them by loosening their locking mechanisms, aligning them with a straight edge, then tightening them back in place.

READ MORE  Dewalt 20v Flashlight Problems

To prevent issues like tear-out or uneven thickness across a board, it’s crucial to have these tables properly adjusted for smooth material feeding through the planer.

Depth Adjustment Mechanism Calibration

The depth adjustment mechanism on your DW735 needs precise calibration for accurate cuts. Make sure it is set according to your desired cutting depth before operating the planer. Test it on scrap wood first to ensure accuracy before working on your actual project.

Calibrating this mechanism correctly will help you achieve consistent and precise cuts without damaging your workpiece due to incorrect depth settings.

Fine-Tuning Planer Settings

Fine-tuning your planer settings is essential in minimizing snipe, which refers to slight depressions at the ends of a board caused by improper adjustments. By adjusting factors such as feed speed and cutterhead pressure, you can reduce snipe significantly during operation.

  • Properly calibrated settings lead to smoother finishes and more uniform thickness throughout your boards.
  • Incorrect adjustments may result in wasted materials and additional finishing work post-planing.

User Experiences with DW735 Planer Problems

Common Issues

Users often encounter dewalt thickness planer dw735 problems like snipe, uneven cuts, and feed issues. These challenges can lead to frustrations during woodworking projects.

Some users report that the planer leaves marks at the beginning and end of boards, known as snipe. This issue can ruin the material and require extra sanding to fix.

Troubleshooting Solutions

To address snipe, users suggest using infeed and outfeed support tables or adjusting the cutterhead lock. Ensuring proper board alignment before feeding it into the planer can help reduce snipe.

Uneven cuts may result from dull blades or improper setup. Regularly sharpening or replacing blades is crucial for achieving smooth finishes on wood surfaces.

Community Insights on Troubleshooting DW735 Planer

Resolving Common Problems

Experienced woodworkers suggest checking blade alignment as misalignment can cause uneven cuts. They also recommend ensuring the blades are sharp to prevent tear-out issues. Users advise cleaning dust buildup regularly to maintain optimal performance.

Some users have encountered problems with the planer’s feed rollers, leading to difficulties in feeding wood smoothly. To address this, they recommend inspecting the rollers for any debris or damage and lubricating them if necessary.

  • Check blade alignment
  • Ensure sharp blades
  • Clean dust buildup
  • Inspect feed rollers

Preventive Maintenance Tips

To avoid common issues with the DW735 planer, experts emphasize regular maintenance practices such as cleaning and lubricating moving parts. They also highlight the importance of periodically checking and adjusting the cutterhead assembly for optimal results.

READ MORE  Dewalt Cordless Framing Nailer Problems

Woodworkers stress the significance of using high-quality materials like HSS replacement blades to enhance cutting precision and reduce wear on components over time.

  1. Clean and lubricate moving parts
  2. Check cutterhead assembly
  3. Use HSS replacement blades

Valuable Tips for Addressing DW735 Planer Issues

Regular Cleaning and Debris Removal

To address DEWALT Thickness Planer DW735 problems effectively, prioritize regular cleaning. Accumulated debris can hinder the planer’s performance. By keeping it clean, you ensure optimal functionality. Use a brush or compressed air to remove sawdust and wood chips from the machine.

Regularly emptying the dust collection system is crucial for maintaining peak efficiency. Clogged systems can lead to overheating and decreased cutting precision. By clearing out debris after each use, you prevent potential issues down the line.

Lubrication of Moving Parts

Lubricating moving parts is essential in preventing friction-related problems with your DEWALT DW735 planer. Apply a small amount of lubricant to pivot points and gears to keep them running smoothly. This simple step helps reduce wear on components, extending the lifespan of your tool.

Proper lubrication also aids in noise reduction during operation by minimizing metal-to-metal contact within the machine. Regular maintenance involving lubrication ensures that your planer operates quietly and efficiently throughout its lifetime.

Sharing Experiences and Solutions for DW735 Planer

Encouraging Engagement

Share your DW735 planer problems to create a supportive community. Discuss issues like snipe, blade longevity, or inconsistent cuts. Engage with others facing similar challenges to find solutions collectively.

Join online forums or social media groups dedicated to planing enthusiasts. Interact with individuals who have years of experience handling the DW735 model. Learn from their insights and tips on maximizing the tool’s efficiency.

Collaborative Troubleshooting

Utilize platforms where users exchange advice on resolving common planer difficulties. Explore different approaches that have worked for others in tackling specific board thickness inconsistencies or feed roller problems.

  1. Share your problem openly.
  2. Seek guidance from experienced users.
  3. Experiment with various troubleshooting methods suggested by the community.
  4. Provide feedback on what solutions worked best for you.
  • Pros: Access diverse perspectives and innovative solutions.
  • Cons: Overwhelming amount of information can be daunting if not well organized.

Final Remarks

You’ve now delved deep into the realm of troubleshooting the Dewalt DW735 planer. From cutter head woes to feed roller challenges, you’ve gained insights and tips from user experiences and community wisdom. Remember, a smooth planing journey isn’t just about fixing problems but also about preventing them. So, keep those blades sharp, rollers clean, and adjustments precise for optimal performance.

As you embark on your planing projects, armed with newfound knowledge and solutions, don’t hesitate to share your experiences and seek advice from fellow woodworkers. The woodworking community thrives on collaboration and shared learnings. Together, we can tackle any DW735 planer issue that comes our way!